進行對瓦斯發電機組配套控制部分檢修
由于長時間運行,瓦斯發電機機組及配套控制部分性能下降,導致機組功率偏低。為保證機組及配套控制部分的良好運行,擬對瓦斯發電機組進行對配套控制部分進行檢修。下面來講講具體的內容吧。
Due to long-term operation, the performance of the gas generator unit and its supporting control parts has declined, resulting in the low power of the unit. In order to ensure the good operation of the unit and supporting control part, it is planned to overhaul the supporting control part of the gas generator unit. Now let's talk about the specific content.
(1)清理就地控制柜、遠程控制柜灰塵,確保內部及外觀效果整潔。
(1) Clean the dust on the local control cabinet and remote control cabinet to ensure that the internal and external effects are clean.
(2)檢測就地控制柜、遠程控制柜各接線頭,確保無松動;若存在松動、脫落現象,重新焊補。
(2) Check the connectors of local control cabinet and remote control cabinet to ensure that they are not loose; If there is looseness and falling off, weld again.
(3)檢測就地控制柜、遠程控制柜電器件,損壞或顯示不準的予以更換。
(3) Detect the electrical components of the local control cabinet and remote control cabinet, and replace them if they are damaged or displayed incorrectly.
(4)檢測并恢復就地控制柜的電能傳輸、電量檢測、運行調控、并網(并車)、自動功率因數自動控制、報警保護、報警試驗等功能,保障各項性能完好。
(4) Detect and restore the functions of the local control cabinet, such as electric energy transmission, electricity detection, operation regulation, grid connection (parallel operation), automatic power factor control, alarm protection, alarm test, etc., to ensure that all performances are in good condition.
(5)檢測并恢復控制系統水溫高、油溫高、油壓低、超速、逆功率、過電流等報警保護功能。
(5) Detect and restore the alarm protection functions of the control system such as high water temperature, high oil temperature, low oil pressure, overspeed, reverse power, overcurrent, etc.
(6)檢測并恢復相關系統的手動或自動控制空燃比功能。
(6) Detect and restore the manual or automatic control air/fuel ratio function of the relevant system.
(7)檢測并恢復相關對發動機參數(缸溫、排溫、水溫、油溫、油壓、轉速、功率、電壓、電流、頻率、累計運行時間、累計發電量等)的自動采集和顯示功能。
(7) Detect and restore the automatic acquisition and display function of relevant engine parameters (cylinder temperature, exhaust temperature, water temperature, oil temperature, oil pressure, speed, power, voltage, current, frequency, cumulative operation time, cumulative power generation, etc.).
對瓦斯發電機組的控制部分進行清理、故障排查,以恢復其性能。更多相關的事項就來我們網站http://m.elmasticar.com進行咨詢吧!
Clean and troubleshoot the control part of the gas generator set to restore its performance. More related matters come to our website http://m.elmasticar.com Consult!