Air cooled diesel engine is usually used in geological exploration, oil exploitation, military and other special industries; The requirements of materials for manufacturing are higher than those for water-cooled diesel engines, because air cooling is not as uniform as water cooling and directly transparent. The requirements for heat resistance, wear resistance and expansion coefficient of materials are higher, and the requirements for manufacturing technology are also higher than those for water-cooled diesel engines. Therefore, the water-cooled diesel engine is widely used in industrial and agricultural production because of its low production cost.

柴油發電機組風冷的特點：

Features of air cooling of diesel generator set:

1.風冷電機必須安裝在敞開式艙室內，噪聲較大，冷卻效果沒水冷好。

1. The air-cooled motor must be installed in the open cabin, which is noisy and the cooling effect is not good.

2.風冷大的優勢就是結構簡單、利于維護、故障率低、啟動性能好，所需空氣量少，風扇消耗功率低，油耗也較低，沒有凍裂或過熱沸騰危險。

2. The advantages of air cooling are simple structure, easy maintenance, low failure rate, good starting performance, less air required, low fan power consumption, low fuel consumption, no risk of frost cracking or overheating boiling.

3.風冷適用于高原或缺水或寒冷的地方，可以不必考慮加水、沸點、凍結等方面的問題，因受到熱負荷和機械負荷限制，功率一般都比較小。

3. Air cooling is suitable for plateau or water shortage or cold places, so it is unnecessary to consider the problems of water addition, boiling point and freezing. Due to the limitation of thermal load and mechanical load, the power is generally small.

濟柴環能燃氣發電設備利用自身長期積累的技術和經驗，推廣以可燃氣體利用為主的環保、節能、安全的燃氣發電綜合利用解決方案，參與項目開發、投資、建設和運行管理，為用戶提供項目可行性分析、設計咨詢、發電設備集成、工程總包和運行管理的全過程服務。

Based on its long-term accumulated technology and experience, jichai environmental energy gas power generation equipment promotes environmental protection, energy saving and safe gas power generation comprehensive utilization solutions based on combustible gas utilization, participates in project development, investment, construction and operation management, and provides users with project feasibility analysis, design consultation, power generation equipment integration The whole process service of project general contracting and operation management.