燃氣發電機組開關損壞的原因是什么?
燃氣發電機組的電磁開關容易損壞,這與什么有直接的關系呢?燃氣發電機組是一種以燃燒沼氣為燃料發電的一種常用機組,因此,電磁開關更容易損壞,燃氣發電機組的電磁開關容易損壞,主要有以下幾個方面造成的:
The electromagnetic switch of gas generator set is easy to be damaged, which has a direct relationship with what? Gas generator set is a kind of common unit which uses biogas as as fuel to generate electricity. Therefore, the electromagnetic switch of gas generator set is easy to be damaged, which is mainly caused by the following aspects:
1.電磁開關質量不符合要求。首先是一個開關的質量問題,如果本身開關的質量就不行的吧,那就更容易損壞啦。
1. The quality of electromagnetic switch does not meet the requirements. The first is the quality of the switch. If the quality of the switch itself is not good, it will be more easily damaged.
2.冬季啟動燃氣發電機組比較困難,啟動時間較長且啟動次數較多,易使電磁開關內部的活動觸片與兩個接線柱的靜觸頭接觸不良或燒結在一起。你可以理解為燃氣發電機組也需要冬眠。
2. It is difficult to start the gas-fired generator set in winter. The starting time is long and the starting times are many. It is easy to make the contact between the movable contacts inside the electromagnetic switch and the static contacts of the two terminals poor or sintered together. You can understand that gas generators also need to hibernate.
3.用一塊蓄電池啟動的燃氣發電機組,若在冬季啟動很困難,可采有兩塊蓄電池并聯啟動,其目的是在電壓不變的情況下,用增加蓄電池容量的方法對機進行啟動,但問題的關鍵是個別燃氣發電機組操作人員將兩塊蓄電池串聯在一起,用增加電壓的方法啟動沼氣發電機組。
3. If it is difficult to start a gas generator set with one battery in winter, two batteries can be used to start the unit in parallel. The purpose is to start the unit by increasing the capacity of the battery under the condition of constant voltage, but the key problem is that the operators of individual gas generator set connect the two batteries in series, Start up biogas generator set by increasing voltage.
若電磁開關要求用12V直流電啟動,而用24V的蓄電池啟動燃氣發電機組,就更易使電磁開關內部的活動觸片與兩個接線柱的靜觸頭接觸不良或燒結在一起。
If the electromagnetic switch is required to be started by 12V DC and the gas generator set is started by 24 V battery, it is easier to make the movable contact piece inside the electromagnetic switch have poor contact with the static contact of the two terminals or sinter together.
以上由燃氣發電機組廠家為大家整理發布的,想要了解更多精彩內容可以直接關注:http://m.elmasticar.com,如有任何疑問會(huì )有在線客服進行解答。
The above is sorted out and released by the gas generator set manufacturer for you. If you want to know more wonderful content, you can pay attention to: http://m.elmasticar.com If you have any questions, online customer service will answer them.